HyperLink
 


Cutting:
CNC Cutting with plasma up to 50 mm of thickness in carbon steel or stainless steel, or oxycutting up to 300 mm, cutting in cold forming with a 19 mm (3/4”) x 6 m guillotine, closing tape 700 mm. x 700 mm., drills with ring shaped bits with tungsten teeth, beveled in cold, etc.

Cold Forming:
Folded in a 19 mm (3/4”) x 6 m angle, rolled 50 mm. (2”) thickness x 3 m with four hydraulic rollers and a minimum diameter of 600 mm, profile folders, rollers with a minimum diameter of 5m and 19 mm. x 500 mm, and three rollers.

  • Rolling in sheets: 3,000 mm in length, 100 mm thickness, 500 mm minimum diameter
  • Rolling of laminated sections.
  • Puncturing in cold.

Assembly:
Qualified assemblers with an average of 8 years with the company, some with more than 10 years seniority in the company and of course in the field. We have toners with 60 MT turning capacity, and handlers of 10 MT. We also have 15 m turners with continuous rollers for the assembly of circumferential joints.

Welding:
Plant welders qualified in SMAW, SAW (Full automatic, semi automatic, and manual), FCAW (inner shield and outer shield), TIG. The equipments of up to 1000 continuous amps or 3000 intermittent amps for stud welds.

Quality Assurance:
We supervise quality with the solidity of our steel. This exclusive department’s mission is oriented to ensure quality and reestablish the technical conditions of our client’s equipment and steel structures.

We focus on the application of your technical requirements:

  • Non destructive testing.
  • Repairs of equipments and pipes: UT,RX,PT,PM.
  • Abrasive cleaning and application of paint (assessment, preventive and corrective maintenance).
  • Technical advice.
  • Elaboration of documentation for guarantee of quality.

Cleaning of the surface and paint:
We have a room for the abrasive cleaning of surfaces up to the white degree or SSPC- SP5; this room is shielded and has a train of cargo movement for feeding, with a capacity for 40 MT. For paint we use 3000 psi airless machines in which the air in the compressors normally contaminated with oil and water makes contact with the paint.

We manufacture under the following norms: ASME, AISC, AWWA, AWS, ISO, SSPC, API, ASCE.